 |
 |
 |
|
TELEDYNE LAARS R0317200 Ignitor, All
Used on the following models:
LLD125, LLD 125, LLD-125, LLD175, LLD 175, LLD-175, LLD250, LLD 250, LLD-250, LLD325,
LLD 325, LLD-325, LLD400, LLD 400, LLD-400, LD125, LD 125, LD-125, LD175, LD 175, LD-175,
LD250, LD 250, LD-250, LD325, LD 325, LD-325, LD400, LD 400, LD-400, LLD125N, LLD 125N,
LLD-125N, LLD175N, LLD 175N, LLD-175N, LLD250N, LLD 250N, LLD-250N, LLD325N,
LLD 325N, LLD-325N, LLD400N, LLD 400N, LLD-400N, LLD125P, LLD 125P, LLD-125P,
LLD175P, LLD 175P, LLD-175P, LLD250P, LLD 250P, LLD-250P, LLD325P, LLD 325P, LLD-325P,
LLD400P, LLD 400P, LLD-400P
The igniter is a "glow bar" type silicon carbide unit. It is
energized whenever there is a call for heat and the red
"IGNITER" light on the boiler control is lit. After the igniter is
switched off and the boiler continues to run, the igniter functions
as a flame sensor for the boiler control.
If the ignitor fails and must be replaced, always install a new
igniter gasket with the replacement igniter.
CAUTION: Ignitor gets hot.Used in the following models:
LD125, LD175, LD250, LD325, LD400, LLD125, LLD175, LLD250, LLD325, LLD400
|
|
|
 |
|
 |
|
|
|
